1. Product Introduction
Transparent waterproof adhesive is a one-component moisture-curing polymer material. It is suitable for the surface of indoor building substrates, without the need for a primer or heating. After curing, it forms a transparent waterproof layer with high strength, water repellency, wear resistance and resistance to high and low temperatures. It features no formaldehyde, no benzene, low volatility and environmental friendliness.
2. Product Features:
· Solvent-free: Free of harmful substances such as formaldehyde, toluene, and isocyanate;
· Easy to apply: Single-component coating, no need for mixing, no primer required, good leveling property, no need to break bricks during application;
· Good low-temperature resistance: After curing, it still maintains good toughness and does not crack in an environment of -40℃.
· Strong adhesion: It has excellent adhesion to concrete, stone, metal, glass, ceramics, wood, etc.
· Water resistance: No delamination after long-term soaking in water;
· Aesthetics: Made of fully transparent material, it does not affect the interior decoration style and color matching, and the surface can be painted after curing.
3. Usage
It is suitable for waterproofing and moisture-proofing on the water-facing side of indoor bathrooms, kitchens, sinks and other areas.
4. Technical parameters: (23℃, 50%RH
Serial number | Project | Result |
1 | Appearance | Transparent flowing state |
2 | Density（g/cm3） | 1.08 |
3 | Viscosity（mPa·s） | 950 |
4 | Surface drying time(h) | 1 |
5 | Hardness (Shore D) | 48 |
6 | Shear strength(MPa) | 4.4 |
7 | Tensile strength(MPa) | 8.1 |
8 | Elongation at break | 6% |
5. Application process:
· Clean the surface of the base material. The surface of the base material should be solid, free of looseness, water accumulation, floating dust, sand and dust, oil stains and other foreign substances.
The construction environment temperature should be between 5 and 35℃.
Apply the coating evenly by methods such as roller coating, brush coating or trowel coating to ensure full coverage of the waterproof area.
The thickness of the coating application is preferably around 0.5mm.
When the construction time is less than 30 minutes per application, it can be applied in several sessions.
The curing time is related to temperature and humidity. After brushing, let it dry for more than 48 hours.
6. Precautions
During transportation, there may be air bubbles in the colloid due to jolting. It is recommended to let it stand for 1 hour before use.
After opening, if the paint is not used up, immediately remove as much air as possible and store it in a sealed container.
During construction, glasses must be worn. If it comes into contact with the eyes, rinse immediately with clean water and seek medical attention promptly.
If it accidentally enters your mouth, please induce vomiting to expel it and seek medical attention promptly.
7. Product Storage:
Store in a dry and well-ventilated place. Do not place in damp, direct sunlight, radiation or high-temperature environments. Keep out of reach of children.
This product is a non-flammable and non-explosive material and can be transported as a general chemical. During transportation, it should be protected from water, sun exposure, squeezing and collision, and the packaging should be kept intact.
The shelf life is 12 months.
8. Packaging specifications:
· Net content: 100g/250g/300g/600g/1kg
9. Safety Operation Data Technical Data Sheet
Product safety data is not included here. Before use, please pay attention to reading the product information, product safety data and packaging labels to ensure safe use. Product safety information can be obtained from Uli and its distributors.
10. Quality Guarantee - Please read it carefully
We guarantee that the product performance and usage information contained here are accurate and reliable. However, before using it, you should still test its performance, safe usage and other aspects. The suggestions for application should not be regarded as applicable in all circumstances. Unless ULI provides a written proof of suitability for a specific need, ULI only guarantees the specifications listed in the product sales manual and does not guarantee other uses.
Youli's sole responsibility lies in providing refunds or exchanges when the products fail to meet the listed requirements. Youli explicitly states that it will not be held responsible for any accidents.
Compiled by Zhejiang Youli New Materials Co., LTD
