I. Product Introduction:
One-component sealant based on modified polyether polymer has excellent bonding performance for materials such as metal, ceramics, stone, wood, glass, and some ABS plastics.
Ii. Product Features
Environmentally friendly with low VOC, no solvent evaporation, and non-toxic.
High initial adhesive strength, rapid positioning, and excellent extrudability;
Strong adhesive force and strong shock resistance;
The surface can be coated and has strong aging resistance.
Iii. Product Application
It is used for various grouting and sealing decorations in interior decoration such as cabinets, toilets, washbasins, shower rooms and skirting boards.
Iv. Product Performance
Chemical Basis: MS polymers
Colour: White
Curing mechanism: Moisture curing
Surface drying time: approximately 15 minutes
Solid content: 98%
Specific gravity: 1.73
Hardness: approximately Shore A 58
Viscosity: Approximately 1920 Pa.s
Curing speed: 4mm/24h
Tensile shear strength/standard test conditions 168 hours: 2.12mpa
V. Instructions for Use
1) Surface treatment
The bonding surface should be clean, free of grease, oil and dust. Applying a primer to surfaces that are difficult to bond (such as easily loose stone surfaces, etc.) can enhance the bonding effect.
2) Construction
Aluminum-plastic pipe packaging: Construction can be carried out by piercing the head of the aluminum pipe with a screw cap.
Hard tube packaging: Just cut open the tube mouth.
Stick masking tape in the gap, squeeze out the adhesive in the gap, and try to fill it as completely as possible. You can use a scraper to press and smooth it out, and then remove the masking tape.
3) Curing time and load-bearing capacity
Do not touch or press within 24 hours after construction. Let it cure naturally
4) Surface finishing (when necessary)
Colored paint can be applied before and after surface drying.
Vi. Packaging
Aluminum-plastic pipe 60g, aluminum-plastic pipe 120g, aluminum-plastic pipe 150g, hard pipe 300ml, flexible pipe 590ml, large drum 200L
Vii. Storage Period
Shelf life (Store in a sealed container below 25℃) : 12 months.
Viii. Safety Operation Data Technical Data Sheet
Product safety data is not included here. Before use, please pay attention to reading the product information, product safety data and packaging labels to ensure safe use. Product safety information can be obtained from Uli and its distributors.
Ix. Quality Guarantee - Please read it carefully
We guarantee that the product performance and usage information contained here are accurate and reliable. However, before using it, you should still test its performance, safe usage and other aspects. The suggestions for the application should not be regarded as applicable in all circumstances. Unless ULI provides a written proof of suitability for a specific need, ULI only guarantees the specifications listed in the product sales manual and does not guarantee other uses. Youli's sole responsibility lies in providing refunds or exchanges when the products fail to meet the listed requirements. Youli explicitly states that it will not be held responsible for any accidents.
